Home ❯ Display Systems & Accessories ❯ Cable Display Systems ❯ 1.5mm Cable Display System – Stainless Steel / Components

1.5mm Cable Display System – Stainless Steel / Components

Basic & Special Cable Fixing Kits

1.5 mm Cable Display System – Stainless Steel comes in standard or special pre-configured suspension kits with ready-crimped cables, fixing plates, tensioners, basic top/bottom or adjustable fixings. Use for standard ceiling-to-floor, wall-to-wall, ceiling-to-wall, wall-to-floor, track suspended applications, or in other special configurations. Standard kits are provided with 3 meters (9′ 10″) and 4 meters (13′ 1-1/2″) long cables that can be shortened or adjusted in place during installation. Kits with longer cables or additional crimped cables up to 8 meters (26′ 4″) or more can be supplied at your request.

2.0M (6′ 5-3/4″) Long 1.5mm (1/16″) Diameter Cable with Ceiling Fixing (#303 Stainless Steel)

C100-2M/SS

Ceiling-Overhead

2.0M (6′ 5-3/4″) Long 1.5mm (1/16″) Diameter Cable with Ceiling Fixing and Panel Support

KC100-TP/SS

Ceiling w/Top Fixing

C101-4M/SS

Ceiling-to-Floor

C113-3M/SS

Wall-to-Wall

C114-WF/SS

Wall-to-Floor

C115-CW/SS

Ceiling-to-Wall

4.0M (13′ 1-1/2″) Long 1.5mm (1/16″) Dia. Cable with Ceiling to Floor Fixings and Toggles

C102-TG/SS

Track-Mount with Toggles

*Cable Sets with compact fixings — use with Interchangeable Base Supports.

Optional Base Supports

25mm (1″), 38mm (1-1/2″), and 50mm (2″) diameters Ceiling/Wall Base Supports are available to replace the standard support included with the cable sets. All stainless steel cable fittings such as top ceiling-fixing, bottom floor-tensioner, as well as wall-mounted fixing can accept these optional size base supports.

ORDER NOW ❯

Optional Base Supports for Cable Systems

Panel & Shelf Supports

Supplied in a range of single and double-sided clamp supports for panels and shelves, top panel supports for overhead signs, top/bottom supports for front mounted panels, multi-position swivel supports for angled presentations, supports for wooden shelves or display cases, as well as picture hooks and supports for hanging rails and rods. Available in a few standard sizes to support 1/4″, 3/8″ and 1/2″ thick panels.

Standard Panel & Shelf Supports

Vertical Support Single-Sided (#303 Stainless Steel)

CP101/SS

up to 7mm (1/4″)

Vertical Support Double-Sided (#303 Stainless Steel)

CP102/SS

up to 7mm (1/4″)

CP103/SS

up to 10mm (3/8″)

CP104/SS

up to 10mm (3/8″)

Vertical Support Single-Sided (*Stainless Steel)

CP105/SS

up to 12.5mm (1/2″)

Top Panel Support (#303 Stainless Steel)

CP107/SS

up to 10mm (3/8″)

Support for Drilled or Slotted Shelf (#303 Stainless Steel)

CS101/SS

up to 25mm (1″)

Locking Support for Drilled Shelf (#303 Stainless Steel)

CS102/SS

up to 12.7mm (1/2″)

Shelf Support Single-Sided (#303 Stainless Steel)

CS103/SS

up to 10mm (3/8″)

Shelf Support Double-Sided (#303 Stainless Steel)

CS104/SS

up to 10mm (3/8″)

CS105/SS

up to 12.7mm (1/2″)

CS106/SS

up to 12.7mm (1/2″)

Specialty Supports

Use for mounting panels with holes, horizontal rods, picture frames or any item fitted with P02 boss.

Support with M6 Stud-Cap Double-Sided for Panels with Holes (#303 Stainless Steel)

CP118/SS

up to 7mm (1/4″)

Support with M6 Stud-Cap Single-Sided for Panels with Holes (#303 Stainless Steel)

CP108/SS

up to 7mm (1/4″)

CP108/SS*

up to 10mm (3/8″)

CP108/SS*

up to 12.7mm (1/2″)

CP109/SS

up to 7mm (1/4″)

CP128/SS

up to 7mm (1/4″)

Support Single-Sided for P07/SS Boss (#303 Stainless Steel)

CR103/SS

any item w/P07/SS boss

Support Double-Sided for P07/SS Boss (#303 Stainless Steel)

CR104/SS

any item w/P07/SS boss

KCR103/CT01

for Aluminum Frames

KCR104/CT01

for Aluminum Frames

CF125/SS

any hanging item

HRAG400R

Graphic Holder

HR25R-3PC_Hanging_Rail_for_Rod_Suspension

HR32C

Clothing Rail

Single-Sided Support for 6mm (15/64″) Diameter Horizontal Rod

CR105/SS

rod dia. 6mm (15/64″)

Double-Sided Support for 6mm (15/64″) Diameter Horizontal Rod

CR106/SS

rod dia. 6mm (15/64″)

Single-Sided Support for 10mm (3/8″) Diameter Horizontal Rod

CR110/SS

rod dia. 10mm (3/8″)

CR110L/SS

rod dia. 10mm (3/8″)

R1000P Non-Threaded 1m (3′ 3-1/32″) Long Rod for 6 mm Rod Display System

R500P

0.5M (1′ 7-11/16″) Long Rod Threaded

R1000P

1.0M (3′ 3-3/8″) Long Rod Non-threaded

R500-10

0.5M (1′ 7-11/16″) Long Rod Threaded

R1000-10

1.0M (3′ 3-3/8″) Long Rod Non-threaded

Installation Accessories

Supplied in a range of components and accessories such as aluminum rails/tracks for standard ceiling-to-floor or wall-to-wall cable suspended applications, wall brackets, quick-fit and standard toggles, power connectors and isolators, decorative support plates, etc.

Suspension Rails/Tracks, Wall Brackets & Toggles

PH1006-AC Aluminum Channel / Horizontal Extrusion for use as rail/rack for cable/rod suspended displays

AC*

Rebate Channel for Ceilings

155-ATC Aluminum Channel / Horizontal Extrusion for use as rail/rack for cable/rod suspended displays

ACT*

Threshold Channel for Floors

PH1028*

28mm (1-1/8”) Section Single-Sided Track

PH1035*

35mm (1-3/8”) Section Double-Sided Track

PH1005*

45mm (1-13/16”) Section Double-Sided Track

370-104

Aluminum End Cap

390-116

Plastic End Cap

MSB-25

Wall Bracket

MDB

Triangular Wall Bracket

PA8 Toggle for channel fixing for Cable/Rod Display System

PA8

Toggle / End-Fit

PA9 Toggle for channel fixing for Cable/Rod Display System

PA9

Toggle / Side-Fit

*Tracks are available in 4, 6, or 8 feet length. An Oversize Handling & Freight Surcharge/Fee per order or shipment will be applied on all items 84” or longer.

Acrylic & Glass Accessories

Everything you need to display posters, photos, brochures, catalogs, magazines, collectibles, and more. Available in a wide range of styles and sizes to suit any display requirements. Choose from standard pre-fabricated items or request custom fabrication to meet your specific display needs.